🛠️ Installation Guide

🔹 Step 1: Install and Launch PC Receiver

Download the **SimWheel Receiver ZIP** from our website and extract it.
Inside, you'll find the Receiver `.exe` and vJoy Setup.

👉 Run `vJoySetup.exe` first.

✅ Configure vJoy:
- Open **Configure vJoy** from Start Menu - Set **Number of Buttons = 32** - Make sure to **disable "Force Feedback"** option - Click **Apply** and close the tool

✅ Important: Disable Force Feedback in Game
- Open ETS2 or any supported game
- In the game’s controller settings, turn **Force Feedback = OFF**
This prevents erratic behavior or freezing while using vJoy.

🔹 Step 2: Mobile App Setup

✅ Install SimWheel App:
After joining the group, install the app from the test Play Store link.
Make sure both your phone and PC are connected to the **same Wi-Fi or mobile hotspot**.

✅ Enter IP and Start Driving:
Enter the IP address shown in the PC Receiver window into the app and tap **Connect**.
Open your game and assign controls using vJoy.

🎮 You're ready to play!

🔹 Step 3: Assign Buttons in Game

✅ Set Up Controls in Game:
- After connecting the app and seeing input in the Receiver window,
- Open your game (e.g., ETS2) → go to **Controls Settings**
- Choose **Keyboard + vJoy Device** as input method (if available)
-gas and brake are axies - Go to **Key Bindings** and press the buttons from your phone
- The game will detect those as vJoy inputs — assign them as desired!

🎯 Example: horn search for horn and press horn in app

🔹 Step 4: Set Axis Mode to Normal

🎥 Setting Guide for ETS2 YouTube Link

✔️ Make sure your Accelerator and Brake controls are set to "Normal" mode in the game's settings.

🚗 In ETS2 or similar games:

Go to Settings → Controls
Scroll down to Acceleration Axis Mode
Select Normal (not Inverted)
Do the same for the Brake Axis Mode

⚠️ If this is not set, your throttle or brake may behave incorrectly (always pressed or never working).